My guess is 45 to 55 lbs. torque. You shouldn't twist them off with that. My experience is they are usually under torqued. Good luck.
CORDiallyMike
You DO NOT tighten head bolts hot!!! Always tighten cold, but do it several times. I tighten the first time then let the engine set for 24 hours or longer and then tighten again. Then put coolant in the engine and run it to operating temp. and let cool again. Then tighten again. Next drive for a while and let cool and tighten again. Keep doing this till no more tighatening is needed. My way, others have other opinions I am sure. Only us non hardening sealer as hardening kinds will be dislodged from multiple tightening.
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.



