If the left rear KO says right side some one has installed the hubs on the wrong side. It would not be possible to put a right spinner on a left hub. Which means that the other hubs are probably on the wrong side also, or they didn't have two rights and two lefts and installed one incorrectly. They should come off with out heat if you are turning them the right direction.
CORDiallyMike
I am working on a 32 Auburn. I had no help in getting the spinners off. They would not budge with a dead blow hammer. I made a aluminum frame that i hit with a big hammer. This got them loose and off. Hit the round side of the ears. It is broken due to hitting it hard and the weld broke. Hope this helps someone.
You need a large lead hammer - get one from Dayton Wire Wheel or ebay via search term: knock off hammer
 
Those big rubber dead blow hammers are THE WRONG TOOL and basically on the flipside leave year wheels unsafely installed too. Also, start penetrating oil too. Then when you reinstall you want to use some anti-seize compound to prevent rust on parts.
The knock-off's are brass, there shouldn't any rust. There are special pullers
out there to remove the drums.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.


