Thanks a lot Randy! I appreciate it.
Does anybody reproduce the Limousine body co. tag? I just became a member of the ACD club, but have no info or directory yet.
Victor
Thank you, Randy, for the info of the car. Glad you have it registered.
 
The title, dated 2006 is to the name of: Timothy C Wilson, in Cape May, NJ,, and it was imported into Mexico in 2013, so, yes!... it has clearly traveled around!
 
Victor
My car did have wood wheels! They were given to me. So, perhaps the car is the one you are referring to.
 
I intend to keep the chromed wire wheels with the car, as they are really gorgeous, but perhaps with black walls as I think the chrome will give the car enough sparkle, if that is the word (sorry, I am not native in English). I will keep the wood wheels just in case.
 
Thanks,
Victor
Hi, Jonathan!
Thanks a lot for the information! I will contact mr. Wilson and see if he can share whatever he knows on the history of the car.
I sincerely appreciate your help,
Victor
There was a Tim Wilson in Cape May, NJ listed in the directory in 2011-2012. Phone was listed as 609-425-1301 and email as timothycharleswilson@yahoo.com I don't know if any of this is current as he is in in the latest directory.
CORDiallyMike
Thank you, Jack. I already dropped a line to Tim Wilson and he responded confirming that is used to be his car and that he will gladly share details and story on it. He offered to get back to me.
I can see so far that this is a great club with lots of support... and a great forum. Thank you guys!
Hi Curt: I don't have the body tag in my car, but I found a pic on the net I can send you. I will PM directly, as you might also have or posibly could refer me to a source for the spark plug cable distributor cap cover thing, spinner wheel tool, set of dasboard knobs, original key blanks and a few more items I will be needing.
Thanks!
Victor
Thank you! I am very interested to talk to Mace also! Tim Wilson confirmed he purchased the car from Mason Maynard (from Chicago, he said, and we are obviously talking about the same person) and that he made new top and interior, plus some mechanical work, including new radiator core. He enjoyed the car a lot in old car rallies... and though it was a "keeper" he eventually sold it because of a divorce.
 
He also confirmed that the dual ratio axle worked when he had it, so it shouldn't be too complicated to get it running again. I will get to that soon.
 
What I did try to do is to look into the exhaust valve, but unfortunately there is non. It was removed at some point, so I have to look for one also.
 
Thanks!
Victor
I talked to Mace Maynard and he is a really great guy! He spent quite a while with me on the phone going over the car's history, what he did to it, and even gave some hints and directions as to how to solve the dual axle ratio problem (not working now).
 
This is what I got on the car's story:
- The car was sold originally in Omaha, Nebraska (that is what Mace thinks) and stayed there till 1959-1961 when it was advertised for sale for $750.
- It went to NW Illinois, where it was restored. Mace does not remember the place but it was apparently done by a man with one arm only. The car was apparently painted in an incorrect pattern for a 8-100A convertible, with the contrasting color on the top.
- From there, the story is not quite clear or better said, quite confussing, but he mentions the car was in Hawaii apparently on two different ocassions, having being sold by a dealer in Colorado.
- According to Randy, it was also in California in the late sixties and auctioned by RM in 1984.
- Mace said the car was at some point owned by somebody in Kentucky.
- Then, by Glenn Church from Illinois. Mace buys the car from the estate of Glenn Church who had been dead for 11 years. That should have been around 1994 and he had it for about 5-6 years. During his ownership, he had all the mechanical components done (engine, axles, driveshaft, he balanced the wood wheels and got dual sided whitewall tires, etc.) by Freemont auto in Freemont, OH. He mentions the car was very complete and very correct, including carburator and fuel pump, and it could ride to about 70-75 mph with great ease and no vibration on the wheels. By that time, the car had vinyl interior with good craftmanship on the seat but not on the doors.
- He sells the car around 2000, to Tim Wilson who is a mechanic and used and enjoyed the car in old car rallies. During his ownership he installed a new clutch , new wood on the rumble seat , built linkage for the pilot ray lights and had the radiator recored. Tim also had a new top made plus new upholstery, unfortunately in vynil again. He installed the beautiful chrome wire wheels and Firestone one sided whitewall tires. He had the car for around 13 years and sells it due to a divorce.
- He sells it to Jose Rivero Colado in 2013, who imports it to Mexico and in 2016 he gives it as payment for another classic to a friend of mine from whom I get it in September 2016.
If somebody can complement the story, I would appreciate it.
No wonder that with all the work that Mace had done plus Tim's expertise as a mechanic, the car really rides great. I only need to get the dual ratio working and find the exhaust cut out for it.
I plan to do a cosmetic restoration on it, maintain the black with carmine combination but change the pattern (I need to find out the correct way that was used on 8-100A... any help will be appreciated).
I also intend to do leather upholstery (I am debating with myself over using leather matching the carmine color or black, and see if i can find a snakeskin pattern leather, as I read in some other posts that it was used by Auburn in those years).
Enough for now... thanks!
Victor
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

.JPG.a813e65bfe93aa976e88e940e9cccdae.webp)