This is the tool. beware of cheap repos. There was one on eBay a few days ago as a BIN. I passed on it. I am looking for one as well.
If you decide to make them, I'll buy one from you.
C
· Jan 28, 2018
Are the knock offs suppose to have grease on them when installed?
Thank you.
R
· Jan 28, 2018
the first series hub cap wrenches are flat with a clip with a plate and wing nuts to hold the wrench to the spinner. The photo is of a wrench issued some time in 1932 and runs through 1933 .Yes the threads should be greased as is the wheel seat on the hubs.R
C
· Jan 28, 2018
Thank you!! Very helpful!
M
· Jan 29, 2018
Strikes me the factory one would mar the chrome. I use a lead hammer, which was a part of many British sports car tool bags back when their knock-offs had ears. If you can't find one anywhere else harbor freight has them.
R
· Jan 29, 2018
Best tool for the job is a shot filled rubber hammer but it to can damage the chrome.. Randy
X
· Jan 29, 2018
Will the Duesenberg wheel wrench also damage the chrome? Thanks for any answer
R
· Jan 29, 2018
Yes the wrench will mar the chrome use a couple layers of masking tape first for Auburn or Duesy. R
M
· Jan 29, 2018
Over the 20 years I have had the car, I can honestly say the damage done by the lead hammer has been negligible. The hammer is sacrificial.
· Feb 5, 2018
I would love to get such a tool also! I need one. I got the car without anything to remove the wheels.
Victor
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.