I take all the heavy stuff of the engine, exhaust and intake manifold, gen., starter, and I don't try and take the trans. with the engine. I made a head plate that I bolt to the cyl. head bolts and lift from that point. I'm sure there are many other opinions on how to do it. You have to pick the one you thing will work for you.
CORDiallyMike
Yes, take all od the ancillaries off the engine. I R&R'd my 31 with the trans and free wheeling attached. Pull the right rear engine mount off the
frame and remove the clutch pedal. A helper is a real plus.
Thanks for all of the advice, we took everything apart and pulled the engine this weekend. The most challenging part was getting the clutch rod and peddles to come off.
 
We made a short video of the process we followed in case someone in the future is interested in watching.
 
What would we be damaging without a good woman to keep us out of trouble. My wife has helped we pull and install several engines over the years. Thanks for the video.
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
