Andy,
I have a friend who is familiar with ALF, I will try and get with him early next week to see if he has any suggestions.
Pat
Andy,
Struck out with my friend but he did give me another name, will try and call him tomorrow.
Pat
Andy,
I was able to get some information for you. Paul's Rod and Bearing in Parkville, MO. (816) 587-4747 offers a service to refurbish your existing bearings. You may want to give them a call to see if they can help you out.
Good luck
Pat
Thank you for the info.
I have decided to proceed with my "Spare" engine and search for parts (or repair) as I have
the time.
Luckily, I bought a partial engine from pete kelley a while back.
THANKS PETE!
During the current and first restoration of my 810 Cord I have decided to move away from babbit bearings all together.
The engine had been converted to modern big end shell bearings many years ago but retained babbited main bearings.
A "machine shop friend" is making new main bearings from phosphor bronze bar plus I am converting the block to full flow filtration as per Bill Richardson's guidelines. Babbit bearings were ok when there were no alternatives.
Preserving an engine these days is essential.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
