OK, I have an old wiring diagram, but not one with that notation about the battery USL.
Nobody reproduces that USL case, I would imagine..
Thanks Curt
I have been buying "cases" for Optima 6VRed Tops - They can be a tight fit in an original Auburn Battery holder (Curt supplied me a reproduction "larger/deeper" bracket, but not something at the time that he commonly had). And, keep in mind that Optima's are great but equally can be a poor choice for certain types of usage = ex. cars that get started repeatedly and driven little, getting a freshly restored car in tune (again frequent starts, excessive turning them over, and .....), and .....
There are a couple of suppliers and most with shipping run 85.00 to $125.00
John: Does the case have a reproduction manufacturer brand on it?
BTW, I found that Optima batteries do not like to be quick-charged. They get hot and take no charge
John: Does the case have a reproduction manufacturer brand on it?
BTW, I found that Optima batteries do not like to be quick-charged. They get hot and take no charge
 
Mark, they are just a black case, but they do have some detail to them and you can pick-up some sort of interesting battery decal via ebay or ... and install (ie they have a flat spot without detail that is perfect for an decal).
I used to use red top Optima's, but now prefer the top of the line NAPA battery. A USL tag could be made from the above pix.
I do have one of those empty cases left that John refers to, if you want to go down that road.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.




