Did you make sure the grease is getting to the bushing?
Do you use waterpump grease?
Did you try tightening up the gland nut?
Pete
Pete, I did snug the nut a bit but have not done grease yet. How tight should the nut be? I did not even realize there is water pump grease, where can that be purchased. That could be part of the issue.
 
It is a very small leak when it is running, seems to quit when parked.
 
The other thing I need to do is some how test if the pump is flowing water, I have changed everything but the water pump and radiator at this point 🙂
I found these two at Restoration Supply, is there a preference?
 
- Water Pump Grease 115 Calcium grease, NLGI # 4. Ideal water pump lubricant. 14 oz can. LUB003
 
- Penrite Water Pump Grease NLGI 4, Calcium based, waxy 50 grams LUB028
Hello Curtiss,In your previous post about over heating your test showed a differential three time more than I would expect normal, this to me indicates poor water flow due to core or other blockage or fault with the pump. To eliminate the pump I recommend you dismantle and inspect the pump. The pump is simple with few parts, though you will need to make a new gasket. Before removing shaft and impeller assembly I would back off the gland nut a few flats to allow the packing to relax this way you should not need to repack the gland. I would check condition of impeller though it would need to be very corroded with broken with missing vanes to give poor flow. Check the impeller to shaft dive pin is not sheared and check the tongue and spigot drive is not disengaged or worn out causing the pump shaft not to turn, if the pump is rotating and checks out OK the the problem is elsewhere. The photos are the main parts of the pump, New Bronze impeller and shaft assembly, shaft bush and gland packing.
UPDATE:
 
I tried holding the outlet hose pinched closed with my hands and it barely pushed any pressure out.
 
I removed the water pump and removed the 4 bolts but for some reason the case is not separating and I did not want to break it so I figured I would ask for suggestions.
 
I could shine a light in the hose outlet and look in the drain plug and I could see what appeared to be an aluminum impeller and it looks a little chewed up. Additionally the shaft does not appear to be secured to the impeller as I could stick a screw driver in to stop the impeller from turning and I could turn the input shaft.
 
Looks like I will need to send it off for a rebuild but I need it back kinda quick as we have a show to go to in early October.
 
Are impellers available any place if this one has to be replaced?
 
Does anyone have a website or phone number for Freemont Auto Parts in Ohio?
The address and phone for Fremont Auto Parts is:
402 Justice St
Fremont, OH 43420
Phone: (419) 332-8296
 
They rebuilt my water pump quickly and with excellent results.
 
John Forsythe (he passed away in 2015)started the business and the business is carried on by the fellas that worked for him. John's 1932 Auburn won best of show at the Labor Day reunion. A really beautiful and correct restoration.
 
Frank
Awesome, I just talked to Jason at Fremont Auto Parts and he said they are about 1.5 weeks to complete so I am shipping it off today to get in line.
 
Thanks for the info!
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.


