Cracks in these blocks is very common. Replacement block is the best route. Because of this issue replacements can be hard to find. Make sure replacement is not cracked before starting machine work. Its not as simple as just putting your old block parts in the replacement block.
Cordially Mike
Cracks in these blocks is very common. Replacement block is the best route. Because of this issue replacements can be hard to find. Make sure replacement is not cracked before starting machine work. Its not as simple as just putting your old block parts in the replacement block.
Cordially Mike
 
I figured the switch over might not be easy but anything would be a step forward from where I am today which is water running into my oil 🙂
 
I have a friend with a smoke machine so my next thing will be to drop the oil pan and run smoke into it to see if I can see where the other crack is.
They crack in the valve seats, sometimes running down in the cyl. bore. also in the valve guide area as you have experienced.
Cordially Mike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
