The machine screw is for oiling the fan bearings. About once a year I rotate the fan so the screw is up and use machine oil to fill the hole. I let it sit for a while and then rotate the fan so the hole is half way down and let the oil flow out. Once it stops flowing I tighten the screw. If you don't oil the fan it can freeze up and then all hell breaks loose.
Frank
M
· Apr 6, 2016
I thought I was missing parts. Thanks Frank !
· Apr 6, 2016
Morning Curt
The service book from Auburn for 8-98 gives the procedure for oiling the fan bearing.
Pete
M
· Apr 7, 2016
Thanks Pete, It just looked like something was missing here.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.