IL
@ilikescars
NAPA has them
Pete
I have bought caps at Hershey that were cheap, $1 to $5. that had the right size carbon.
Cordially Mike
JM: Yes, I thought that might be the reason it was coming loose, good point. I used a small dab of JB Weld and jammed the spring back into the hole. Then used JB weld to stick the carbon back onto the spring. Let it cure overnight and tried it. Works well so far. (I also put a small amount of electrical grease on the rotor contact to reduce friction)
Mark
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.