I would suggest fixing the leak, not changing lub. I converted the seal on my L-29 with a lip seal. Maybe that could be done with your 32 Auburn.
Cordially Mike
try adding oil then turn hub to the 9 0clock
position
when level replace plug
John Forsythe at fremont auto parts makes a
conversion with sealed bearings
cant be detected and solves the problem
I have several thousand miles on mine
greg
Mine did the same thing from the time I acquired it. Greg is correct on the suggested procedure for filling it. I personally figured that a little oil leaking out was preferable, so I filled mine in the 12 o'clock position until I noticed a drip in back of the pulley. Worked fine for many years. I agree with Mike that there's no reason to change old technology that's working. However, when I began to notice some play a few years back, I bit the bullet and had Fremont Auto Parts modify my hub. You have no play, I say keep oiling and roll with it .
 
Don't know for a fact that it does or doesn't get a seal, but in taking mine apart to ship, I didn't notice one.
Thank you all for the replies
 
I did read about the Fremont parts mod and that's probably the way I will have it done eventually.
 
I was just trying to enjoy driving the car this summer and fall without wasting time with the car needed fixes like it did all last winter.
 
Will give these guys a call and ask what the turnaround time they have on this mod.
 
I cannot find any reasons why stuffing the hub with a light grease would be any worse than dripping oil - as a temporary fix at least.
Fremont did the fan hub modification for me on my 1931 Auburn back in May. I talked with Jason in the shop and they did a great job and I had it back in about a week. I also had them re-line my brake shoes and they did a great job.
 
If you want an original one, I also contacted Felix at ACD factory and he said they had a bin with some originals.
 
TR
Great ! thanks a lot. Will also ask Felix.
 
In the meantime I found this chart with valuable info about fan lubrication - it seems that since "excess oil" needs to be drained..maybe just keeping a small amount of oil at the bottom of the hub will suffice.
 
Seems like John has isn't working at Fremont anymore.
 
Has anyone dealt with Fremont recently ?
John has retired but the information and expertise is still at Fremont Auto. Ask for Tom or Jason, they will be able to help you.
Cordially Mike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
