Amp Gauge - reach out to an Auburn parts vendors (ex. Curt Schulze, or ..... - there are several) or have yours rebuilt. It may also have the wiring flipped to the wrong side of terminals.
 
Gas Gauge - poor design and you can spend all the money in the World to rebuild it and still will work for a season at best. Good news is that on our 851 Phaeton the sending unit has an access hole in the trunk floor (though do not know about speedsters). For a new sending unit reach out to http://www.mykmlifestyle.com/ Tubing and fluid is available via Ford suppliers or I believe http://www.classicandexotic.com/
 
The on-off for the radio also turns on a light in the radio head - it is not as bright nor does it light green like the other gauges.
 
Trip Mileage is also poor design - I can usually get it to work for a while and then .....
My gas gauge has worked for 6 yrs and aprox. 30,000 miles.
CORDially Mike
It would be advisable to send all of your gauges to an instrumentation shop for service. Each unit has it's own peculiarities, but generally speaking, they are not complicated designs. As with each of the units you described, I would first recommend having the ammeter serviced prior to any further running, as they can gain resistance and become quite hot while in use.
 

To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
