Hi Peter
 
great project and nice pictures. Keep us posted.
I am shure some of the fellows will be able to tell you more about the colors.
 
First you will have to achieve some space around the car in your great work shop, just to work at the car :wink:
 
Andreas
Hi Andreas, thanks for the comments...I wish it were my workshop but it's a friends and yes I've told him he should clear some space around the car to work.
 
The chassis is all done and painted and recently he's been replacing the rotten wood with new wood, then we'll get around the the metal work...
 
I hope to have a fresh update soon.
 
Peter
Hi Randy, I don't have much information at the moment. It's currently in California and the previous owner bought it about 10 years ago from someone on the East Coast (I think!).
 
But I'll send him an email tonight to see if I can find more details, even to see if he has a copy of the old title....
 
I'm still trying to make my mind up if I should stay with the original two tone green or go with a period color combination...
 
Thanks
Randy/Peter,
 
the chassis number should be at the very front frame horn where the spring attaches. this is where the number was for my 1930 8-125 and we also certified a few 1930 models with the numbers there also.
 
Joel
I thought I'd add a photo of the leather and leatherette I've rescued from the car...the leather was taken from the door panels, I made sure I took a sample from behind the door as well. I'm hoping this has seen less direct sunlight so hopefully hasn't faded as much.
 
The two tone green leatherette or vinyl was taken from behind the front seat and under where the convertible top folds down.
 
So as the car was a green car, the leather looks like it was green too...was this standard? I only ask as I've only seen brown on a green car.
 
Cheers
 
Peter
saw that you're in La Habra - if you'd like, you can come out to Temecula and see my 8-95 for comparison. I think I can show you where all the cert #'s are.
Neal
I thought I would update my posts with a few more photos...since the last post.
 
We've had to replace some of the rotten wood, it's a shame all of this work will be covered once the sheet metal is on the body.
 
It was around this that I started to think of paint...
 
...and started playing with photoshop a little and ended up with a red & black combination
 
The wheel were the first colour test
 
So now it was back to more work on the body, the more we dug the more needed replacing...but we are almost there
 
With the help and patience of Neal Ziff we were able to look at his car, take measurements and generally use it as a source of reference during the restoration of my car...
 
I'm going down to see the car in the morning and will post some fresh photos soon, but for now here are two of the latest photos showing work to the top structure...it finally has a convertible top frame again...
 
Thanks
 
Peter
One thing I forgot to mention is that I need some help...please.
 
With the top frame hinge, is the chrome nut on the outside or the inside?, see the photos below. Do any of you have any photos of this top hinge?
 
For me, it looks like it should be on the outside as the bend in the arm looks like it should avoid the wood...in the other photo it looks too tight, but that's only because we are testing it at the moment and nothing is fixture perminantly yet...still lots of adjustments going on.
 
 
http://i203.photobucket.com/albums/aa121/redranch_photos/1930%20Auburn/P1070390_zps4b8b0f2d.jpg
 
http://i203.photobucket.com/albums/aa121/redranch_photos/1930%20Auburn/P1070384_zpsd705fede.jpg
 
...here is the original section the top arm/hinge bolts too, but we don't know if there is anything missing as this is all that was on the car...
 
http://i203.photobucket.com/albums/aa121/redranch_photos/1930%20Auburn/P1070386_zps4ec91600.jpg
 
...and here is a photo from the other side of the car
 
http://i203.photobucket.com/albums/aa121/redranch_photos/1930%20Auburn/P1070392_zps20f26dc7.jpg
Good job, still a long way to go...
I also checked the color combination by photo shop. Black-Red is a tough combination. I made some sample doors and fenders frome the bone yard. You will be surprised about the difference between a small sample and a complete panel. Finally I did go for a kind of brown-red, because the first choice "carmin red" was far too bright. Keep in mind, the colors were much more decent those days.
 
Keep us posted.
 
Andreas
Hi Andreas, thanks for the comments. Did you see the period colour chart on the previous page? I think we settled on Coach Painters Red - Light, something that is not too bright but not too brown-red.
 
I saw the colour on a 29 Speedster he has in his shop, it looked good on the car.
 
Cheers
 
Peter
Peter,
 
Thanks for sharing, she's looking good!
I thought I would post an update on the car, it may not look like much has happened since the last update, but we are still making progress...sorry for the quality of the photos, I'll try and do better ones next week.
 
We are still missing 2 atillery wheels to be used as spares in the fenders, so if you have any or know of any please let me know.
 
I'll be getting a quote on the engine rebuild this week...
 
We are going to have to order more wood this week too, the wooden top template is almost done, so now it's time for the final wood to be cut and fitted.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
