Auto part stores have a lubricant in a tube for this problem. I think it has some grahpite (?) in it.
M
· Nov 14, 2010
thanks Tom - I'll check at my local NAPA
M
· Nov 15, 2010
Beware using to much lub. It will wick into the head of the speedometer and cause faulty readings.
CORDially Mike
M
· Nov 15, 2010
I used "Slip Plate" graphite coating. It goes on kinda like a paint. Purchased from McMaster Carr. Works very well.
 
Mark
M
· Jul 19, 2015
I would recommend removing the cable to clean the core and housing, then checking the core for kinks before lubricating with a light lithium grease or one of the commercially available cable lubricants. You need only lubricate the first 2/3 of the core as you insert it into the housing to prevent over lubrication.