@alsancle
Replies (4)
I got a call from Dan Shaferman in Lansing with help on taking this apart. Here is what he said. I'll let everyone know how it goes.
1. Be sure the lock wire is removed. It may be hidden under grease or sediment but the the bearing cannot be removed until the wire is taken off.
2. Pop the seal out. Do not worry about bending it as you can hammer it back into shape before re-installation.
3. Make a tool that fits into the holes. Turn counter clockwise to remove.
The procedure as posted works. We needed to make a tool to actually spin the insert out. The bearing in my pump actually looks find but I'll see about getting a new one. I'll post the source if anyone else needs one.
Here is the bearing. You can order one from Bearing Specialties, 508-798-2222 Scott.
Here are some pictures from Mark of his water pump and the part number in case anyone ever needs to find one.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.