@alsancle
Replies (10)
The complete brochure is scanned and in the Library. You can find it here:
https://reoroyale.com/library/folder/Farval%20Chassis%20Lubricator
You can see the unit mounted on the firewall on the right.
You can see the lever mounted here to the left of the steering wheel under the dash.
The unit on the firewall originally had a label on it. I have ordered a sticker from stickermule.com using the following enhanced image of the original sticker. I'll let you know how it comes out. The original spec I used was oval 2x4 inches.
A.J. is there a photo of where this goes on the can?
I might be able to find one.
I remember using it when we got the car up and running. Not only did we lubricate each area of the chassis, but also the garage floor, driveway and undercarriage of the car after driving it. Needless to say, we went to grease and zerc fittings.
😂
Frank, that is a mistake that I have made a couple of times myself with bijur systems. What you did is fine if you are not going to heavily use the car but the chassis was designed for oil not grease and it won't really lube the way it is supposed to with fittings. However, like I said, if you are not gonna tour with it then no harm no foul.
These are from Dave Marshall and show the unit out of the car.
I got my Farval stickers today. They are 4x2. I'll get a picture on the car. I have a few extra so if you PM me I'll mail you one.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.